Climate← ruthner.atWeather Amstetten →DEEN
Climate · worldwide · calculated myself from raw data

The Earth’s climate in data

This is not about the weather outside my front door (that is on the weather page), but about the whole Earth: the last 420,000 years in the ice core, the last 2,000 years, land and sea temperature since 1850 on the globe, 41 climate models against measurements, and CO₂ – how much, where it comes from, and what a single country would change. Wherever possible, I calculated it myself from the raw data.

Weather is what is happening outside right now; climate is the average over many years and a large area. More in the overview.

Attention, teaser: In the calculator further down, the EU's target is already preselected, and it brings … oh, just see for yourself! Austria also wants to be climate neutral by 2040: how much global warming that saves in the year 2050 is only revealed under "For the curious" …
For the curious

According to this calculation, Austria becoming climate neutral by 2040 brings 0.00045 °C less global warming in the year 2050 (range 0.00027 to 0.00063 °C). The estimated costs are about 51 to 103 billion € by 2050.

How the value comes about: Austria's CO₂ emissions of 2025 are reduced evenly to zero by 2040. The amount saved by 2050 is about 1 billion tonnes of CO₂. It is multiplied by the IPCC relationship: 0.45 °C per 1,000 billion tonnes of CO₂ (likely range 0.27 to 0.63). All other countries carry on unchanged.

Try it yourself: Further down, anyone can experiment with the published climate data (CO₂ emissions per country, IPCC relationship), including other countries and targets: Go to Countries & scenarios.

Values wrong? Please report.

Time travel

From today back to the ice age

One chart, four scales: from the last 90 years in Amstetten to 420,000 years of ice core. Start the time travel or drag the slider, and move the mouse or your finger along the curve. The golden window shows how far we looked in the previous step.

Statistics on the data – time travel
90 years: official station Amstetten84 annual means (1936–2025, gap 1989–1992 open) from 31,299 daily values; only years with at least 11 months
90 years: my station12 annual means (2003–2015) from 4,484 daily values within the official time window
2,000 years200 decadal values, Ljungqvist 2010
12,000 and 420,000 yearsVostok ice core: 3,311 temperature and 283 CO₂ values
02 — My perspective

Warm, yes – but what is the cause?

The numbers on the weather page show that it is getting warmer, not why. Here is my personal view on that, kept separate from the measurements.

Assessing the cause

The climate on Earth has always fluctuated, for example with the Roman and Medieval Warm Periods and the Little Ice Age. Wood finds under melting glaciers point to earlier warm phases. The IPCC attributes the warming since 1850 predominantly to greenhouse gases; other researchers see larger natural shares (sources further down). How large the human share is, I leave open. The measurements on this page can neither prove nor disprove the question.

My assessment: The "Little Ice Age" ended around the middle of the 19th century, and the Earth has been recovering from it since. For me, this is the main factor for why it is getting warmer. How large an additional human share is cannot, in my view, be quantified precisely. The IPCC sees this differently (see above).

For people, warm periods in history were often good times (better harvests, growing population), cold phases often worse ones. That says nothing, however, about how a faster warming affects us today, and that depends strongly on the region.

Climate models · global air temperature

The same with the Earth’s air temperature

AIR · Air temperature of the whole Earth (2 m height, land and sea) 41 climate models (CMIP6) against the measurements HadCRUT5 and Berkeley Earth
Interactive chart (hover the mouse or a finger over the curves), calculated by myself from the raw data of 41 CMIP6 models (one run each, Pangeo/Google Cloud archive) and the measurement series HadCRUT5 (Met Office) and Berkeley Earth. 12-month mean; the chart first shows 1979 to 2046, and with the “show from 1850” switch the whole series since 1850. Expandable below: how exactly the calculation was done.

What it shows: The mean air temperature of the whole Earth (2 m above the ground, over land and sea), in each case as an anomaly from the 1961–1990 mean. The coloured lines (blue: weaker, red: stronger warming) are 41 climate models (CMIP6); the thick white line is the HadCRUT5 measurement series, the dotted light line Berkeley Earth (to 2024). Up to 2014 these are the hindcasts of the past (historical); after that the models continue with the scenario SSP2-4.5 to 2046; from 2026 the chart is a projection, not a measurement.

What you see: Of 41 models, 32 warm more strongly than the HadCRUT5 measurement series from 1979 to 2020 (39 more strongly than Berkeley Earth). The measured global air temperature rises by 0.194 °C per decade (HadCRUT5; Berkeley Earth 0.167), the models on average by 0.253 (median 0.250, range 0.143 to 0.416). Up to the end of 2025 the measurement rises by 0.207 °C per decade, the models by 0.261; 32 of 41 models warm more strongly. By 2046 the models project on average 1.76 °C above the 1961–1990 mean; the measurement at the end of 2025 is at 1.07 °C, the model mean at the same time at 1.18 °C.

On scope: The selection is one run per model (mostly r1i1p1f1). In the measurement series, air temperature is measured over land, but water temperature over the sea; the model air temperature applies everywhere at 2 m height. This difference makes the models warm somewhat more strongly on paper and has not been removed here.

Trend 1979–2020 per model, °C per decade
Trend 1979–2020 per model, °C per decade
How this was calculated – data, steps, limits

1 · Data retrieved

  • Measurement: HadCRUT5 (Met Office Hadley Centre / University of East Anglia, version 5.2.0.0), global monthly means of surface temperature since 1850, a small table; Berkeley Earth (land and ocean, global monthly means, to December 2024). Both were converted to the 1961–1990 mean.
  • Models: CMIP6 archive “Pangeo” on Google Cloud (variable tas, air temperature at 2 m height, monthly mean), the same 41 models and runs as for sea temperature, historical to 2014 and ssp245 from 2015, read for 1850 to 2046.

2 · Calculated

  1. Global mean: for each month the mean over all grid cells of the Earth, weighted by the cosine of latitude (area correction).
  2. Anomaly: from each series (measurement and each model) its own mean over the 360 months of 1961–1990 is subtracted.
  3. Smoothing: moving average over 12 months (for readability only).
  4. Trend: linear slope of the monthly values (least squares), converted to °C per decade, for 1979–2020 and additionally to the end of 2025 (Berkeley Earth to the end of 2024).

3 · Result in numbers

Measurement 1979–2020: HadCRUT5 / Berkeley Earth0.194 / 0.167 °C/decade
Models: mean / median0,253 / 0,250
Models: weakest / strongest0,143 / 0,416
Models with a stronger trend than HadCRUT5 / Berkeley32 of 41 / 39 of 41
To the end of 2025: HadCRUT5 / models (mean)0.207 / 0.261 °C/decade
Model mean 2046 relative to 1961–19901,76 °C

4 · Limits and caveats

  • The selection (one run per model) is my decision; with other runs the numbers and the picture change.
  • Measurement series and models do not measure the same thing: the series combine air temperature over land with water temperature over the sea, whereas the model tas is air temperature everywhere. This makes the models warm somewhat more strongly; a correction (masking as in the measurements) has not been calculated here.
  • Both measurement series fill areas without measurements (for example the polar regions) statistically; the methods differ and lead to slightly different trends.
  • The cosine as an area weight is an approximation (no cell areas from the model files).
  • After 2014 the scenario SSP2-4.5 applies; up to about 2030 the scenarios differ hardly at all, after that they diverge. The lines from 2026 are projections under this assumption, not a prediction of the actual course.
  • A single run also contains random variability (for example El Niño).

5 · Sources

  • CMIP6: Eyring et al. 2016, via the Pangeo CMIP6 archive (storage.googleapis.com/cmip6), terms of use of the modelling centres (mostly CC BY 4.0).
  • HadCRUT5: Morice et al. 2021, J. Geophys. Res. Atmos., Met Office Hadley Centre.
  • Berkeley Earth: Rohde & Hausfather 2020, Earth System Science Data.
Statistics on the data – climate models and air temperature
Climate models (CMIP6, air temperature at 2 m)41 models, one run each, grid cells 56 to 417 km wide (median 139 km), 2,364 monthly values each (Jan 1850 – Dec 2046), 96,924 in total; averaged over the whole Earth for each month
HadCRUT5 measurement series (Met Office)2,112 monthly values (Jan 1850 – Dec 2025)
Berkeley Earth measurement series2,100 monthly values (Jan 1850 – Dec 2024)
CalculatedAnomaly from the 1961–1990 mean, 12-month moving average, trend 1979–2020 and to 2025 (Berkeley to 2024) per model and measurement series, model mean, range
CO₂ · amount, sources, memory

How much CO₂ is in the air, where does it come from, and what would a country change?

First the order of magnitude (how little CO₂ there is in the air and what it is made up of), then the countries with their own calculation scenarios, then the “memory” of the atmosphere: the seasonal cycle at Mauna Loa and how long a tonne of CO₂ stays in the air. The sources are given below each chart.

Amount and origin

How small is 0.04 per cent?

💬 In plain language
  • Air consists almost entirely of nitrogen and oxygen. CO₂ is a very small part of it.
  • Out of 10,000 air particles, only about 4 are CO₂ particles.
  • It used to be slightly fewer, about 3. Today it is about 4. The increase comes mainly from people burning coal, oil and gas.
  • Nature also produces a lot of CO₂ every year. Plants, soils and oceans release it and take it up again. This is about 17 times as much as people emit.
  • However, nature takes up more in total than it releases. It even absorbs part of the CO₂ that people emit. The rest stays in the air. That is why there is more of it there.
  • How much warmer this makes it is estimated with computer models. More on this in the tab “Countries & scenarios”.
Detail of the upper left corner, magnified 40 times
remaining air (nitrogen, oxygen, argon …)CO₂ already present before industrialisation (278 ppm)CO₂ increase since 1750 ( ppm)
Out of 10,000 air particles, about are CO₂ particles: per cent by volume ( ppm, annual mean 2025). Each square stands for one hundredth of a per mille of the air. Source: NOAA Global Monitoring Laboratory (global annual mean); pre-industrial 278 ppm according to IPCC AR6.
Annual exchange: who “produces” the CO₂?
Each year roughly 200 billion tonnes of carbon move back and forth between air, plants, soil and sea (respiration, decay, outgassing). Human emissions (combustion, cement, land use), at 11.6 billion tonnes of carbon (2024), are about 5% of that, 4 to 5% depending on the calculation. The natural exchange is therefore by far the larger item.
Of 100 tonnes of CO₂ from human emissions: where do they go?
Each square is one of 100 tonnes of CO₂ that people emit (average 2015 to 2024). Around 29 are taken up again by the ocean, around 21 by plants and soils. The remaining 50 or so stay in the air. That is why the CO₂ content of the air rises only about half as fast as humans emit it. Figures for 2024 in billion tonnes of carbon: emissions 11.6; the ocean takes up 3.4, the land 1.9; 7.9 are added to the air; a small remainder of 1.7 cannot be allocated. Source: Global Carbon Budget 2025.
The CO₂ in the air today
The amount in the air has risen from 278 to about 426 ppm. The increase of about 147 ppm corresponds to roughly 35% of today’s level. It is smaller than what humans have emitted, because sea and plants absorb part of it (see next chart).
Where did human CO₂ go? 1850 to 2024
Total emissions 1850 to 2024: 751 billion tonnes of carbon (503 from combustion and cement, 248 from land use). Of this, 39% stayed in the air, 27% went into the sea, 23% into land ecosystems; 11% cannot be allocated in the balance. Source: Global Carbon Budget 2025 (Friedlingstein et al.).
How is this calculated, and what does “from humans” mean?

Share of the exchange (about 5%). This is a ratio of annual amounts: human emissions (11.6 bn t C) to all flows between air and nature (roughly 200 bn t C per year according to IPCC AR6). It answers “who releases how much each year?”.

Share of the stock (about 35%). This is the increase in the amount of CO₂ in the air since 1750 relative to today’s amount. It answers “how much more is there than before?”. Both figures are correct; they simply answer different questions.

How the origin is attributed. First, human output (751 bn t C since 1850) is larger than the increase in the air (292). Second, carbon from fossil sources carries its own isotopic signature (no carbon-14, less carbon-13); this ratio in the air has shifted accordingly. The balance does, however, have a gap of 80 bn t C (11%) that is not allocated.

Ppm means “parts per million”: 426 ppm is 0.0426 per cent by volume. Conversion: 1 ppm CO₂ corresponds to 2.124 billion t of carbon or 7.78 billion t of CO₂.

Countries and scenarios

What changes if a country sets its CO₂ to zero?

💬 In plain language
  • Here you can try out what changes when a country emits less CO₂.
  • The calculator uses an assumption from climate science: 1,000 billion tonnes more CO₂ make the Earth about 0.45 degrees warmer. This is an assumption, not a measured value.
  • Austria emits about 0.14 out of 100 parts of the world’s CO₂. If Austria saves a great deal, the warmth of the whole Earth changes by only tiny thousandths of a degree. This is because the air is distributed around the whole Earth. What counts is what all countries emit together.
  • To try it out: select all countries (“All”) and set the slider to −30%. You then see what happens if all countries together save 30% (about 0.4 degrees less by 2100). This is not realistic, however: the biggest CO₂ emitters, China, the USA and India (together more than half of global emissions), are so far not taking part.
  • “Zero” means: immediately no more coal, oil or gas. There would then be no petrol cars, no oil heating and no aeroplanes as we know them today. That is why this is only a thought experiment.
  • The costs are a rough estimate. The first steps are fairly cheap, the last very expensive. The curve below shows this.
Choose a target
Reduction in emissions: 28%
Until
Select countries
Temperature path
Contribution of the selected countries to warming

On the assumption behind this calculation: All values assume that CO₂ acts as the IPCC states, namely 0.45 °C per 1,000 billion t of CO₂ (likely range 0.27 to 0.63). This is the calculation assumption of this page. How strongly CO₂ actually acts, I leave open here. The assessment has changed over the years: older presentations often assumed very high emission scenarios, and some climate models warm more than the measurements. Both are weighted less in the latest IPCC report, so the expected warming by 2100 is lower than before.

My assessment – cost and effect: The calculation is meant to show the order of magnitude of what is being done in Austria, Germany and the EU. One example is the EU path: by this estimate it costs about 1,650 to 3,300 billion € in total by 2050 and brings about 0.017 °C less warming (range 0.010 to 0.024 °C). I did not find any calculation by official bodies of how many degrees the EU or Austria alone would achieve. Everyone can form their own picture of whether cost and effect are in a reasonable proportion.

Economy: For energy-intensive companies in the EU, electricity is, according to the International Energy Agency, more than twice as expensive as in the USA and about 50% more expensive than in China. I fear that industry will move abroad as a result and that Europe will lose economic strength; I have not found reliable figures on this. The EU also names further reasons for its policy, such as less dependence on energy imports and cleaner air. These can be weighed independently of the temperature figure.

Role-model effect: The EU aims to be a role model for other countries. I doubt that this will succeed: according to media reports, India, China, Russia, Brazil and South Africa jointly rejected the EU's carbon border levy (CBAM) in August 2026 as unilateral, punitive and protectionist. In 2025, China commissioned as many new coal power plants as in no year for a decade (about 78 gigawatts, although they run at only about half capacity there). Polls see the EU as mostly positive overall (Pew 2025: a median of 62% in 25 countries), but that does not concern its climate course. If climate policy weakens one's own economy, hardly anyone has so far followed it at the same pace. The evidence is further down under Links.

Adaptation: I would find it sensible to put a larger part of the money into adapting to climate change, for example flood and heat protection, adapted agriculture and a secure water supply.

How is this calculated, and what does it not show?

Assumption: The country's emissions in 2025 are assumed to stay constant ("business as usual") until the chosen year and then set to zero. The amount saved is the difference.

From the amount, the temperature effect follows linearly via the IPCC’s cumulative relationship (TCRE): 0.45 °C per 1,000 bn t CO₂ (likely range 0.27 to 0.63, AR6). The effect on the CO₂ level in the air assumes the measured airborne fraction of 39% (see “Amount & origin”) and uses 7.78 bn t CO₂ per ppm.

Costs (estimate): These are abatement costs for an orderly transition with replacement technology, not taxes and not the cost of an immediate stop without replacement. The cost scale follows the IPCC (AR6, Working Group III): measures up to about 20 US dollars per tonne of CO₂ make up more than half of the potential, and measures up to about 100 US dollars per tonne could avoid roughly half of the 2019 emissions worldwide by 2030. From this, a rising marginal-cost curve is derived here (lower estimate: 0 to 10 €/t for the first 25%, 10 to 50 € up to 50%, 50 to 100 € up to 75%, 100 to 200 € up to 100%; upper estimate: 0 to 20, 20 to 100, 100 to 200, 200 to 400 €/t). The values above 50% are an extrapolation and not from the source. The costs are net costs without avoided climate damage and without co-benefits (for example saved energy imports, cleaner air). For Austria, the Federal Environment Agency estimates additional investments of 6.4 to 11.2 bn € per year for climate neutrality by 2040 (1.1 to 1.9% of GDP); the range calculated here for 100% is about 3.6 to 7.2 bn € per year, the same order of magnitude. For comparison: the price in EU emissions trading was mostly 70 to 90 € per tonne in 2026.

On the value “per avoided thousandth of a °C”: It results solely from the price per tonne and the IPCC relationship (0.45 °C per 1,000 bn t CO₂). It is therefore the same for every country and hardly changes with the time horizon; it rises only when the reduction goes deeper, because the average cost per tonne rises. It states what a thousandth of a degree less warming costs under this calculation assumption, and is thus more a conversion of the assumption than a finding in its own right. Differing costs in different countries are not included in the calculation.

Not included: land use (deforestation), methane and other gases, relocation of production to other countries, feedbacks and the behaviour of other countries. These are production-based figures (what is emitted within the country itself), not consumption-based ones. “EU-27” includes its member states; if both are selected, the members are counted only once. The result is an order of magnitude and not a prediction. Sources: Our World in Data (Global Carbon Project), IPCC AR6.

The formulas behind it

The page does all calculations in the browser, using the figures from two small files (emissions by country, temperature series). They are simple, linear calculations; here step by step (E = emissions, r = reduction relative to 2025, H = selected year).

1 · Reduction path. On the EU path, the reduction falls linearly from 0 in 2025 to the target value in the target year and then stays constant. The EU targets are relative to 1990, so they are converted to the 2025 level of the selection (E₁₉₉₀ and E₂₀₂₅ are the CO₂ emissions of the selection in those years):

r(y)=ra+(rb−ra)·y−yayb−ya(between two target years a and b)
r2030=1−0,45·E1990E2025r2040=1−0,10·E1990E2025

2 · Amount saved (sum over the years, in billion t CO₂ after converting from Mt):

ΔE(H)=∑y=2026HE2025·r(y)

3 · Temperature and CO₂ concentration. The factor 0.45 °C per 1,000 billion t is the IPCC relationship between emitted CO₂ and warming (TCRE, range 0.27 to 0.63). 39% of the CO₂ remains in the air; 7.78 billion t CO₂ correspond to 1 ppm:

ΔT=ΔE·0.45 °C1,000 billion t CO₂Δc=ΔE·0.397.78 billion t CO₂ per ppm

4 · Costs. m(x) is the marginal cost in € per tonne at a reduction of x%. It rises linearly between the anchor points 0, 25, 50, 75 and 100% from 0, 10, 50, 100 and 200 € (lower estimate) or 0, 20, 100, 200 and 400 € (upper estimate) respectively. The average over the reduction gives the cost per tonne; multiplied by tonnes it gives the cost per year, and the sum gives the cost up to H:

K(H)=∑y=2026HE2025·r(y)·m¯(100r(y))m¯(p)=1p∫0pm(x)dx

5 · Price per thousandth of a degree and curve. The “with reduction” curve is the model-mean curve (SSP2-4.5) minus the effect ΔT(t), which grows year by year:

Price per 0.001 °C=K(H)ΔT/0.001Twith(t)=Tmodel(t)−ΔT(t)

Not included are methane and other gases, land use, feedbacks, relocation of production and the behaviour of other countries. It is an order of magnitude, not a prediction.

The memory of the atmosphere

Seasonal cycle, spiral and residence time

💬 In plain language
  • The Earth “breathes” in the rhythm of the seasons.
  • In spring and summer, plants in the Northern Hemisphere (for example in Europe, Asia and North America) grow. They take CO₂ from the air. That is why the CO₂ level falls until autumn.
  • In autumn the trees lose their leaves, and plant remains decay. This releases CO₂ into the air again. That is why the level rises in winter and spring.
  • This up and down is about 7 ppm in size. On top of that comes a rise of about 2.4 ppm a year. This rise matches what people emit, because sea and plants absorb only part of it.
  • A tonne of CO₂ that enters the air today stays for a long time: after 20 years about half to two thirds is still in the air, after 100 years about 40 per cent.
Keeling spiral: Mauna Loa since 1958
Each loop is one year, running clockwise from January (top). The radius is the CO₂ level.
Monthly means from Mauna Loa (Hawaii), 3,400 m high in the middle of the Pacific, hence little local pollution. The rings move outwards because the level is rising, and wobble with the seasonal cycle. Source: NOAA Global Monitoring Laboratory.
The seasonal cycle (mean 2015 to 2025)
In spring and summer in the Northern Hemisphere, plants take up CO₂ and the level falls until October; in winter it rises again. The swing between May and September is about 7 ppm, the rise over the year about 2.5 ppm. The seasonal cycle thus balances out each year, while the rise remains.
How long does a tonne of CO₂ stay in the air?
Share of a one-off CO₂ pulse that is still in the air after t years (model function after Joos et al. 2013). Part of it disappears quickly, part stays for centuries. The “memory” is therefore the long residual amount. Hover over the line with the mouse.
Why does CO₂ fluctuate over the year?

The plants of the Northern Hemisphere “breathe” along. Most of the land area, and thus most of the forest and farmland, lies in the Northern Hemisphere. From about May to September the plants are growing: through photosynthesis they take CO₂ from the air and build leaves, wood and fruit from it. The CO₂ level in the air therefore falls over several months and reaches its low in September or October.

In autumn and winter this reverses. The leaves fall and photosynthesis rests. Soils, leaf litter and dead wood, however, continue to be broken down by fungi and bacteria, releasing CO₂. In winter there is also more burning for heating. The level therefore rises again from October and reaches its peak in May, just before the plants sprout again.

How big is it? At Mauna Loa the peak and the low are about 7 ppm apart, around 1.6% of the level. Near the ground over Siberia or northern China the swing is clearly larger (over 10 ppm, see globe), and over the South Pacific almost zero, because there is hardly any land there and the seasons run in opposition.

Why the low point is in September and not in July: Until late summer, plants take up more than soils and leaf litter release. Only when photosynthesis declines does release predominate, and the concentration rises again.

And humans? The rise of currently about 2.4 to 2.5 ppm per year is superimposed on the seasonal cycle. The seasonal cycle balances out within a year: what plants take up in summer, they mostly release again in autumn and winter. The rise, by contrast, goes in the same direction every year.

How is this calculated?

The spiral and the seasonal cycle come directly from the NOAA monthly means (columns “average” and “deseasonalized”; the difference is the seasonal cycle). The decay curve is the impulse response from Joos et al. (2013), a sum of four exponential functions:

f(t)=a0+∑i=13aie−t/τi

with a₀ = 0.2173, a₁ = 0.2240, a₂ = 0.2824, a₃ = 0.2763 and τ₁ = 394.4, τ₂ = 36.54, τ₃ = 4.304 years. This is a model of carbon uptake by sea and land, not a measured value.

Land and sea

Where is it getting warmer? – On land and sea.

Annual mean of sea surface temperature (NOAA ERSSTv5, 1854–2025) and, optionally, of land temperature (Berkeley Earth, 1850–2024) as an anomaly from the 1961–1990 mean. The slider goes back to 1854; “Play” starts at 1979. Play, choose a year or switch to “Trend”; the globe can be rotated and zoomed. Where has it become warmer since 1979 – on land, at sea or both?

💬 In plain language
  • The globe shows how warm it was compared with earlier times (1961 to 1990 mean). Red means warmer, blue means colder.
  • “Warmest year” shows, for each place on Earth, the year in which it was warmest there. Dark red means: only since 2015.
  • “El Niño”: every few years the water in the Pacific off South America becomes unusually warm. This changes the weather in many countries. The map shows the difference from the cool “La Niña” years.
  • “CO₂ in the air” shows where there is more or less CO₂ near the ground. It is a computer model that is checked against measurements.
2025
2025
Annual mean, anomaly from the 1961–1990 mean (°C)
−1,50+1,5
Earth surface: NASA Blue Marble (GIBS) · Coastlines: Natural Earth · Land: Berkeley Earth · Sea: NOAA ERSSTv5

Before about 1900 the data are sparse (light area on the left): few ship measurements, large ocean areas filled in statistically; the identification of El Niño and La Niña years is uncertain there. El Niño year · La Niña year · Volcano: major eruptions. Sulphur-containing gases rise into the stratosphere and form fine particles there that reflect sunlight; the Earth then cools by a few tenths of a degree for one to three years. Krakatau (Indonesia, August 1883), Santa María (Guatemala, October 1902), Agung (Bali, March 1963), El Chichón (Mexico, March/April 1982), Pinatubo (Philippines, June 1991, the strongest eruption of recent times, with up to about 0.5 °C of global cooling) and Hunga Tonga–Hunga Haʻapai (Pacific, January 2022, an underwater eruption that released mainly water vapour; the effect on temperature is small and still disputed). After Pinatubo the curve stays low for several years (1991/92 is also overlaid by an El Niño); in 1982 the eruption coincided with a strong El Niño, so the effect there cannot be separated out.

What the map shows – expand for explanation

What it shows: For each 2° × 2° grid cell, the annual mean sea surface temperature, subtracted from the mean of the years 1961–1990. Red is warmer, blue colder than in this reference period. Land and sea ice are left out in grey. With “Trend” the map instead shows how many degrees per decade each cell changed from 1979 to 2025. The slider goes back to 1854; before about 1900 there are only a few ship measurements at sea, and large areas are then filled in statistically (the map looks smoother there than the data actually are).

What you see: The tropical Pacific fluctuates the most. Since 1950, the warmest years in the Niño 3.4 region (5°S–5°N, 170°W–120°W), measured against the mean of all oceans, were 1987 (+1.1 °C), 2015 (+1.1 °C), 1997 (+1.1 °C), and the coldest 2022 (−1.2 °C), 1999 (−1.2 °C), 2021 (−0.9 °C): these are El Niño and La Niña. In the trend, not all seas warm equally: the temperature rises most in marginal and inland seas, in the Caspian Sea (up to about +0.9 °C per decade), the Black Sea, the Baltic Sea and the Mediterranean (mean +0.4), and also in the Barents Sea. Across all cells between 60°S and 60°N the trend is about +0.13 °C per decade; in the eastern equatorial Pacific it is barely present at +0.04, and in the south-eastern Pacific off southern Chile it cools slightly (−0.14).

On scope: ERSSTv5 is a series statistically filled in from ship and buoy measurements, especially in the early years and in remote areas. The map shows the sea surface, not the air temperature over land.

How the map was calculated
  • Data: NOAA ERSSTv5 (Huang et al. 2017, J. Climate), monthly sea surface temperature on a 2° grid, one file of 162 MB from psl.noaa.gov. The years 1854–2025 were used.
  • Annual mean: for each cell the average of the twelve months; cells with fewer than nine valid months are left empty.
  • Anomaly: from each annual mean, the 1961–1990 mean of the same cell is subtracted.
  • Trend: linear slope of the annual values 1979–2025 for each cell (least-squares method), in °C per decade; cells with fewer than 80% valid years are left empty.
  • Display: The values were rounded to steps of 0.05 °C and loaded as a file (sea 2.8 MB, land 11.3 MB, about 0.9 and 1.5 MB respectively when transferred compressed) on opening; the map is drawn in the browser. The line in the timeline below is the mean temperature anomaly of the sea between 60° south and 60° north (excluding the polar regions with sea ice). Each cell counts according to the area it actually has: cells near the poles are smaller than at the equator and are therefore weighted less, by the cosine of latitude (1.0 at the equator, only 0.5 at 60°).
  • Globe: The sphere uses the MapLibre GL library (BSD licence), coastlines and country borders from Natural Earth (1:110 million, public domain) and, as the coloured Earth surface, the “Blue Marble – Shaded Relief and Bathymetry” tiles from NASA (GIBS, public domain), which are loaded directly from NASA when viewed. The colours are calculated in the browser from the same 2° grid (bilinear interpolation) and laid onto the sphere as tiles; this is why the coastal edges look softer than in the flat map.
  • Events in the timeline: El Niño and La Niña years are determined from the same data: a year counts as El Niño-dominated if the sea surface in the Niño 3.4 region (5°S–5°N, 170°W–120°W) was at least 0.5 °C warmer in its annual mean than the mean of all oceans between 60°S and 60°N, and as La Niña-dominated if it was at least 0.5 °C colder (relative index; it removes the long-term warming and measurement differences of the early years). This is simplified; the official classification uses running three-month means and changing reference periods. The dashed marks show major volcanic eruptions (Krakatau, August 1883; Santa María, October 1902; Agung, March 1963; El Chichón, March/April 1982; Pinatubo, June 1991; Hunga Tonga–Hunga Haʻapai, January 2022).
  • Land temperature: The “Land temperature” layer comes from the gridded land data of Berkeley Earth (Rohde et al. 2013, 1° grid, CC BY 4.0 licence): annual mean per cell, anomaly from the 1961–1990 mean, as with the sea data; available from 1850 to 2024 (very sparsely covered before 1900, so the grid values are heavily interpolated there). When switched on, the colour scale changes (±2 °C or ±0.6 °C per decade), because the values over land fluctuate more.
  • Land series in the timeline: With land temperature switched on, the timeline additionally shows the area-weighted mean (cosine of latitude) of all land cells of the Earth including the polar regions, 1850–2024, as an anomaly from the 1961–1990 mean. The sea line applies only to 60°S–60°N; the two lines therefore do not describe the same area.
  • Limits: Sea ice and coastal cells are uncertain; the reconstruction is less accurate before the satellite years. An annual mean shows no seasons. On the globe the coastlines come from a coarse source and do not match the 2° cells exactly everywhere.
Statistics on the data – oceans and land temperature
Sea temperature (NOAA ERSSTv5): monthly maps read2,064 (Jan 1854 – Dec 2025), each 89 × 180 grid cells, about 33.1 million individual values
From this: annual maps172 years, 1,889,936 valid cell values (68.6%); the rest is land, sea ice or too patchy
Sea cells with data (2° grid)about 11,000
Land temperature (Berkeley Earth): monthly maps read2,100 (Jan 1850 – Dec 2024), each 180 × 360 cells (1° grid)
From this: annual maps175 years, 3,454,307 valid cell values (30.5%), 24,311 land cells per map
CalculatedAnnual mean per cell, anomaly from the 1961–1990 mean, trend 1979–2025 (sea) and 1979–2024 (land), relative Niño 3.4 series, global time series 60°S–60°N
Delivered to the page2 files: 2.8 MB (sea) and 11.3 MB (land), about 0.9 and 1.5 MB when transferred compressed, value step 0.05 °C
How large are the calculation points (grid cells)?
DatasetCell sizeCell width at the equator / at 48° N (Amstetten) / at 60° NArea at the equator / at 48° N
Sea temperature (NOAA ERSSTv5)2° × 2° (89 × 180 cells)222 km / 149 km / 111 kmabout 49,600 / 33,000 km²
Land temperature (Berkeley Earth)1° × 1° (180 × 360 cells)111 km / 74 km / 56 kmabout 12,400 / 8,300 km²
Climate models, air temperature (CMIP6, 41 models)depending on the model from 0.5° to 3.75° longitude, 64 to 360 latitude rows; median 1.25° × 1°56 to 417 km, median 139 km (cell height 56 to 313 km, median 125 km)Median about 17,400 km² (smallest cells about 3,100, largest about 100,000 km²)
Climate models, sea temperature (CMIP6)mostly about 1° (about 100,000 cells); two models 0.25° (about 1.5 million cells), the coarsest 2° (about 13,000 cells)mostly about 100 km, at 0.25° about 28 km, at 2° about 220 kmmostly about 10,000 km²
Computer model ERA5 (only in the comparison with Amstetten)0.25° (about 31 km, given as “about 28 km”)31 km / 21 km / 16 kmabout 960 / 640 km²

Important: A cell is a mean over the whole area, not a measurement at a single point. A single place (for example Amstetten, 48° N) can therefore deviate from the cell value, especially with a coarse grid. The width of the cells decreases towards the poles (by the cosine of latitude), while the height stays the same. For the global means each cell counts with this weight, so that every area counts equally. For the models: each model calculates on its own grid; I have not converted anything to a common grid.

Ice and sea

Sea ice and sea level

Three measurement series from satellite data: how much sea ice the Arctic and the Antarctic have over the course of the year, and how sea level has changed since 1993. Shown here without any model calculation of my own, only the measured values of the sources.

💬 In plain language
  • In winter the sea around the poles freezes over; in summer part of it melts away again.
  • The first chart shows this for the Arctic (North Pole). Since 1979 the ice area in September has been getting smaller. The values vary strongly from year to year.
  • The second chart shows the Antarctic (South Pole). There the sea ice grew slightly until 2014; since then there has been markedly less.
  • The third chart shows sea level. It has risen by about 10 centimetres since 1993.
ARCTICArctic sea ice extent, monthly means for March and September, 1979 to 2026

What you see: In September 2026 the ice area was million km², which is compared with the 1981 to 2010 mean. The trend since 1979 is per decade. In March 2026 it was million km² (trend per decade). The lowest September value was in 2012 with million km².

Scope: What is measured is the area with at least 15% ice cover, not the ice volume. The values are monthly means of daily values (every second day until 1987). Source: NSIDC, Sea Ice Index, Version 4, doi:10.7265/a98x-0f50.

ANTARCTICSea ice extent around Antarctica, monthly means for September (maximum) and February (minimum), 1979 to 2026

What you see: Until 2014 the sea ice area around Antarctica grew slightly (September: per decade). 2014 was the year with the largest September area, at million km². Since then it has shrunk markedly ( per decade since 2015); the lowest September value was in 2023 at million km². Over the whole period 1979 to 2026 there is practically no trend ( per decade). In September 2026 it was million km².

Scope: This is the sea ice around the continent, not the ice on land. The Antarctic ice sheet is measured differently (satellites for height and gravity field). According to the IMBIE assessment, between 1992 and 2017 it lost on average about 109 billion tonnes of ice per year, mostly in West Antarctica and on the Peninsula; East Antarctica gained slightly (about 5 billion tonnes per year, mainly through more snowfall). Sources: NSIDC (as above), summary of the IMBIE study (Shepherd et al. 2018) and IMBIE update to 2020.

SEAGlobal sea level since 1993, satellite altimetry

What you see: Global mean sea level has risen by about millimetres since 1993, on average by millimetres per year. The series runs until .

Scope: This is a mean over the whole ocean; regionally, sea level rises and falls differently. The annual cycle and land uplift and subsidence (GIA) have been removed by the authors. Shown is the change relative to the mean of the first year. Source: University of Colorado Sea Level Research Group, version 2026_rel2, using radar altimeter data (RADS, provided by NOAA and TU Delft); Nerem et al. 2018, PNAS, doi:10.1073/pnas.1717312115.

07 — Conclusion

What can be said from the climate data – and what cannot

It has become warmer. Since 1979 the sea surface temperature (60°S–60°N) has risen by about 0.12 °C and that of the global air by about 0.19 °C per decade (HadCRUT5). The maps show this on land and sea; over large areas the warmest year has only been since 2015.

On average, the models run warmer than the measurements. Of the 41 climate models calculated (one run each, scenario SSP2-4.5), most have warmed more strongly than the measurements since 1979 (sea: 35 of 41, air: 32 of 41). The spread between the models is large (sea 0.11 to 0.26, air 0.14 to 0.42 °C per decade).

CO₂ has risen, and humans emit more than ends up in the air. The concentration rose from about 278 to around 426 ppm. Since 1850 about 751 billion t of carbon have been emitted, of which 39% stayed in the air, the rest went into sea and plants. The annual natural exchange is much larger than the human share (about 5%).

What a single country changes is tiny in the calculation. Austria emits about 0.14% of the world’s CO₂. Using the IPCC assumption (0.45 °C per 1,000 billion t CO₂), a 30% reduction by 2100 results in about 0.0006 °C less warming. The estimated costs are given in the CO₂ section, tab “Countries & scenarios”.

The long time spans show fluctuations. In the Vostok ice core, temperature and CO₂ rise and fall together over four glacial cycles, with CO₂ lagging the temperature by roughly 1,000 years on average. Over the last 2,000 years there were warm and cold phases (Roman and Medieval Warm Periods, Little Ice Age). Whether temperature is rising faster today than before depends on the time period and on the temporal resolution of the data.

What the page does not show: It does not prove causes. The choice of models (one run per model, only one scenario), the data situation before 1900 and the calculation assumptions are explained in the expandable notes. My own assessment is marked as such in the section “My perspective”.

09 — Questions and answers

Terms and methods briefly explained

What do the technical terms mean, what was calculated, and where does the data come from? Click a question and the answer expands.

What is a temperature anomaly?

Instead of the absolute temperature, most charts show by how many degrees a value lies above or below a reference mean. Depending on the chart, the reference mean is 1961–1990 (mostly), 1979–1983 (Spencer’s original) or 1993–2020 (Amstetten); it is stated alongside each one. Red/yellow means warmer, blue colder than in this reference period.

Why anomalies and not the temperature itself?

Locations and instruments differ in their level (altitude, site, measurement height). Anomalies from each series’ own mean make changes comparable even when series lie at different levels. This is standard practice for trends.

What is a trend “per decade”?

The slope of a straight line fitted through all values in the period (least-squares method), converted to ten years. A trend of +0.13 °C per decade means: on average an increase of 0.13 °C per ten years over the chosen period. It depends on the period and says nothing about individual years.

What is NOAA ERSSTv5?

A sea surface temperature series from the US weather agency NOAA, since 1854, based on ship and buoy measurements, with gaps filled statistically, on a 2° grid (about 200 km). The page uses 1979–2025.

What are Berkeley Earth and HadCRUT5?

Two independent analyses of the Earth’s surface temperature from weather stations (over land) and sea measurements. Berkeley Earth (University of California) also supplies a 1° grid for land, which the page uses for the land colours. HadCRUT5 comes from the British Met Office. Both were used here only as global monthly means.

What are CMIP6 and the “climate models”?

CMIP6 is an international comparison project in which research centres run their climate models (computer simulations of atmosphere and ocean) with the same inputs. Used here: 41 models, one run each, sea surface and air temperature. These are calculation results, not measurements.

What do “historical” and “SSP2-4.5” mean?

“historical” are hindcasts of the past up to 2014 with the actual forcings (greenhouse gases, volcanoes, Sun). SSP2-4.5 is a scenario from 2015 with an assumed, intermediate development of emissions. Everything from 2026 onwards is therefore a projection under this assumption, not a measurement and not a prediction of the actual course.

How do you get from raw data to the finished chart?

From the raw data to the line in the chart there are six steps, the same for the models (A) and the measurements (B).

A · Climate modelsRaw datatos, tas · per cellSelection1 run per modelWeightingcos φ-weightedAnomalyminus 1961–1990Smoothing12-month meanResult41 lines + meanB · MeasurementsRaw dataERSSTv5, etc.SelectionBerkeley EarthWeightingcos φAnomalyminus 1961–1990Smoothing12-month meanResultMeasurement lineC · ComparisonBoth on the same basisTrend 1979–2025 per model and measurementChart and tableModel range, mean, measurement in the same pictureAll steps run in Python (xarray, dask); the raw data stay unchanged, and each step produces a new intermediate file.

Model example: A grid of several tens of thousands of grid cells becomes a single number per month. After anomaly and smoothing, one curve remains (1850–2100), from which the trend is calculated. The formulas for this are in the next question.

Which formulas are behind this?

The five calculation steps of this page and the two basic physical relationships without which the model discussion cannot be understood.

1 · Area-weighted mean. Grid cells at the poles are smaller than at the equator, so each cell counts with the cosine of its latitude φ:

T¯=∑iwiTi∑iwi,wi=cos(φi)

2 · Anomaly. From each monthly value, the mean of the same calendar months in the reference period 1961–1990 is subtracted, which removes the seasonal cycle:

TAnomaly(t)=T(t)−1360∑m∈1961–1990Tm

3 · Trend. The straight line through the points (time t, temperature T) by the least-squares method; b is the slope:

b=∑(tj−t¯)(Tj−T¯)∑(tj−t¯)2(°C per year, times 10 = °C per decade)

4 · Radiative forcing of CO₂. With C as the CO₂ concentration and C₀ as the baseline value (approximation after Myhre et al. 1998). A doubling gives about 3.7 W/m²:

ΔF=5.35·ln(CC0)W/m²

5 · Climate sensitivity. The warming ΔT is the forcing ΔF times a sensitivity parameter λ (°C per W/m²). It is precisely this λ that distinguishes the models (see above); it is not prescribed but results from clouds, water vapour, ice and ocean in the model:

ΔT=λ·ΔF

On the greenhouse effect: The equilibrium temperature of the Earth without an atmosphere follows from the Stefan-Boltzmann law, with albedo α ≈ 0.3, solar constant S ≈ 1,361 W/m² and σ = 5.67·10⁻⁸ W/(m²K⁴). The measured average is about 288 K; the difference of about 33 K is the greenhouse effect:

Te=(1−α)·S4σ4≈255 K
What is a climate model, and how does it work?

A climate model is a computer program that divides the Earth into a grid of cells (atmosphere, ocean, ice, land) and, for each cell, steps forward the physical equations for flow, heat, water vapour and radiation. What the grid shows too coarsely (for example individual clouds) is replaced by simplified assumptions (“parameterisations”). A model does not predict tomorrow’s weather, but calculates how the climate develops on average over decades. Each research centre builds its own model, which is why they differ.

What are “forcings”?

Forcings are the external influences prescribed to a model: the concentration of greenhouse gases (CO₂, methane), particles from volcanoes and industry, solar radiation and land use. In the “historical” run, the forcings actually measured or reconstructed are used. Beforehand, a control run (“piControl”) with constant, pre-industrial forcings is carried out; the model starts from it. It shows how much the climate fluctuates by itself without any external change.

What is a scenario, and what do SSP1-2.6, SSP2-4.5, SSP3-7.0 and SSP5-8.5 mean?

Nobody knows the forcings for the future, so the models run several assumptions (“scenarios”). SSP stands for “Shared Socioeconomic Pathway”, a development path for population, economy and energy use. The second number is the additional radiative forcing in 2100 in watts per square metre compared with pre-industrial: SSP1-2.6 (sharply falling emissions), SSP2-4.5 (middle road, used here), SSP3-7.0 (high emissions) and SSP5-8.5 (very high emissions). Scenarios are assumptions, not predictions. Which of them occurs depends on decisions, and no probability is assigned to them. On this page only SSP2-4.5 is calculated; until about 2030 the scenarios differ very little.

What is the difference between a forecast, a projection and a hindcast?

A forecast concerns the actual course of events (for example the weather of the next few days). A projection is an “if-then” calculation: if the forcings follow the scenario, this development results. A hindcast re-calculates the past with known forcings. In the charts, everything up to the end of 2014 is hindcast, and from 2015 it is a projection under SSP2-4.5. The models do not know the actual events from 2015 onwards (for example a real volcanic eruption or a real El Niño); the comparison with the measurement for 2015 to 2025 is therefore not a pure test of the models.

What does “r1i1p1f1” mean, and what is an ensemble?

The code identifies a single model run: r = realisation (start from a different state), i = initialisation, p = physics version, f = forcing version. Because the climate has chaotic fluctuations (for example El Niño), the same model gives a slightly different course when started slightly differently. Several runs of the same model are called an ensemble. The average over many runs shows the development caused by the forcing, while a single run additionally contains random fluctuations. Here one run of each of the 41 models is used, mostly r1i1p1f1.

Why do the models give different results?

The models have different grids, calculate clouds, sea ice and aerosols differently, and react with different strength to more CO₂. One measure of this is the equilibrium climate sensitivity, that is, the warming for a doubling of the CO₂ content: for the CMIP6 models it ranges from about 1.8 to 5.6 °C (Zelinka et al. 2020). This is why the spread between the lines is large, and why the page shows not just the mean but all models. The model mean is a calculated value and not a better truth than the individual models.

What is the greenhouse effect?

The Earth is warmed by the Sun and radiates heat into space. Water vapour, clouds, carbon dioxide and other gases in the atmosphere retain part of this thermal radiation, which is why the surface is on average about 33 °C warmer than it would be without these gases. Water vapour contributes the largest share (see the NASA analysis under “Links”). What is disputed is not that the effect exists, but how strong the warming from additional CO₂ is and how large the human influence on it is.

What is the difference between sea surface temperature and air temperature?

Sea surface temperature is the water temperature of the uppermost layer and rises slowly, because water stores a lot of heat. Air temperature is measured 2 m above the ground or water and fluctuates more, especially over land. In the measurement series of surface temperature (HadCRUT5, Berkeley Earth), air temperature is used over land and water temperature over the sea; the model air temperature is at 2 m height everywhere. This is why the page has separate charts for sea and air.

Why is the data before 1900 less certain?

Before 1900 there were only a few measurements at sea, taken by ships along the trade routes, and the instruments (buckets, thermometers) and measurement methods changed. Large areas, especially in the Southern Hemisphere, were never measured. NOAA and others fill these gaps statistically; the course there is therefore partly calculated. Over land, too, there were only a few stations before 1880, and the gridded values from Berkeley Earth are heavily interpolated there. The maps and curves before 1900 are therefore shaded lightly on the page and marked with a note. Statements about individual years are weak there, statements about decades better.

Why does CO₂ fluctuate over the year?

From May to September, plants in the Northern Hemisphere, where most of the forest and farmland lies, take CO₂ from the air through photosynthesis; the level falls and reaches its low in September or October. From October the leaves fall and photosynthesis rests, but soils and leaf litter continue to decompose and release CO₂, and heating adds to it; the level rises until about May. The swing at Mauna Loa is about 7 ppm, considerably more near the ground over Siberia or northern China, and hardly anything over the South Pacific. Plants balance out the seasonal cycle within a year; the rise of about 2.4 ppm per year remains. See the section CO₂, tab “Memory”.

What is a proxy, and what is an ice core?

A proxy is a natural archive from which past temperatures are derived indirectly: tree rings, sediments, stalagmites, ice. An ice core is a drill core from the ice sheet: the ratio of the hydrogen isotopes (deuterium) in the ice indicates the temperature of Antarctica at the time, and the air trapped in the ice bubbles indicates the CO₂ content at the time. The age is accurate only to within a few hundred to a thousand years.

What is the Ljungqvist reconstruction?

A reconstruction of the temperature of the extra-tropical Northern Hemisphere (30–90 °N) over the last 2,000 years from 30 proxy series in decadal values (Ljungqvist 2010). It is smoothed over decades and applies to this region, not to the whole Earth.

What does “Calculate offset” mean for temperature and CO₂?

The program shifts the CO₂ curve in time against the temperature curve and looks for the shift at which the two lie best on top of each other (highest correlation). Because of the dating uncertainty of ice and air, the result is a guide value for the timing and says nothing about the cause.

What are El Niño and La Niña?

Fluctuations in sea temperature in the tropical Pacific that influence the weather worldwide: El Niño = unusually warm water, La Niña = unusually cold water. Here, years are marked as El Niño or La Niña years if the Niño 3.4 region (5°S–5°N, 170°W–120°W) was at least 0.5 °C warmer or colder, respectively, in the annual mean than the mean of all seas (60°S–60°N); this removes the long-term warming trend. The official classification is finer (running three-month means).

Why are volcanic eruptions marked on the timeline?

Large explosive eruptions throw sulphur gases into the stratosphere. There they form fine suspended particles (aerosols) that reflect part of the sunlight, and the Earth cools slightly for one to three years. Three eruptions of the measurement period are marked: El Chichón (Mexico, 1982), Pinatubo (Philippines, 1991; the strongest cooling, up to about 0.5 °C in the global mean) and Hunga Tonga–Hunga Haʻapai (Pacific, 2022; an underwater eruption with a great deal of water vapour, whose temperature effect is small and not yet conclusively settled). They are shown as markers so that fluctuations in the curve can be put in context; in 1982 a strong El Niño overlaps the effect. The years come from generally known information; they are not derived from the temperature data.

How large are the individual calculation points (grid cells)?

The data lie as a grid over the Earth: each cell stands for the mean over its whole area. The sea temperature (NOAA) has cells of 2° × 2° (at the equator about 222 × 222 km, at 60° latitude only 111 × 222 km), the land (Berkeley Earth) 1° × 1° (about 111 km). Depending on the model, the 41 climate models have cells of about 56 to 417 km width (median about 139 km), and the ocean components mostly about 100 km. The exact table is in the “Statistics on the data” in the section “Land and sea”. A place like Amstetten lies in a cell of about 150 × 220 km (2° grid) and is averaged there with its surroundings.

What is cosine weighting?

When averaging over the globe, grid cells near the poles count for less because they are smaller. Weighting is done with the cosine of the latitude, so that every area counts equally.

Where do the colours and images on the globe come from?

The Earth’s surface comes from the NASA “Blue Marble” tiles (public domain), the coasts and national borders from Natural Earth. The temperature colours are calculated in the browser from the grid data (bilinearly from 2° or 1° cells). This is why coastal edges look softer than they are in reality.

What does the page not show?

It does not show causes. Temperature series alone do not tell why it became warmer or colder. My perspectives are marked as “My assessment”. The data gaps, the selection (one run per model) and the uncertainties are given in the expandable explanations. The weather on my doorstep in Amstetten is on the weather page.

And on the doorstep? The weather in AmstettenTo the weather page →

Feedback

Values wrong, an idea or a question? The message goes directly to the author of the page. Name and email address are optional and are only used for a reply.